|
|
|
|
|
|
|
|
Finished Chamber |
|
Looking down the exhaust port, you can see that I did only a little work on opening up the area. It was already well opened! |
|
|
|
|
|
|
|
|
|
|
Crumbling Boss |
|
Here you can see the exhaust guide boss that was starting to degrade, and the steps I've taken to smooth the area out. |
|
|
|
|
|
|
|
|
|
|
Another Shot |
|
Same port, different shot, showing less flash glare. |
|
|
|
|
|
|
|
|
|
|
|
Comparison |
|
Here you see the modified chambers I've finished today, compared against standard sized/shaped chambers on the bottom. Those with really good ability for visual comparison may note that the intake valves on the bottom head are slightly larger than the head on top. That's the most obvious clue making this an MG Metro head. |
|
|
|
|
|
|
|
